Last Sunday Pam, Becky, and I attended the Luther College Christmas concert. It was great! Projects received attention, including a Mac computer upgrade and finishing of the holiday cards. Let’s jump in!
A heart-felt “Thank You!” to Becky for purchasing the Luther College Christmas concert tickets. We greatly enjoyed the two-hour event that featured several choirs, a jazz number, and audience participation.
We kept talking about the music and reflecting on the various performances all the way home. Luther College is located in Decorah, Iowa, and is about a 50 minute drive from us. For more details about the college and the music program you can open this link: https://www.luther.edu/music/christmas-at-luther
This was the front of this year’s program.
Pam finished the holiday cards and all have been mailed. We have been receiving some cards as well and they are good to see. (Sure beats bills in the mailbox.)
I have completed my Mac computer upgrade for the most part. The older Mac Pro with a 4-core processor has been replaced by an 8-core model and the operating system upgraded to the current version. All software was either re-installed or new versions purchased. The older unit’s hard drive has been wiped and a clean version of the operating system installed. Now I need to take some photos and list it on E-Bay to see if I can recover some of the money spent on the newer unit.
The remaining holiday lights were put up and the tree decorated. Not quite as many outdoor lights as last year, but the cold snap somewhat limits outside time anyway.
Our local birds and squirrels are on “life support” — enjoying the feeders and water dish, giving us many opportunities to keep an eye on their antics. I particularly like watching the small birds at the water dish as they bob up and down while drinking. It’s also interesting to watch squirrels as they drink, head down, while still clinging to the tree. I hope to get some video, or at least a still photo, of these antics.
I continue to search for a spring for the old mortised lock set used on the east door. While this type of lockset was once common, finding parts these days is a real pain. The spring in question keeps the door bolt extended until you turn the knob to retract it and open the door. It is a small leaf spring, and I did create a partial solution by using an old spring from a screen door latch, but it’s not as strong as the original and works only so-so. I may have to double up a similar spring if an original cannot be found. This is the lockset partially disassembled:
Looking on-line to find a replacement spring or lockset has proven to be futile as none of the sets I found, new or used, have the same dimensions, particularly the length of the front plate. Oh the joys of living in an old house…
We observe a slower pace over the winter months. NE Iowa did get a bit of snow last night so I was out this morning to shovel the sidewalks, a task many of our neighbors seldom do. Not that many people are walking, but I generally feel better having our walks cleared and it gives me a bit of outside time and exercise.
That’s it for now. Thanks for looking in!
Pam’s Penny
Thank you, Canada, for a series of frigid weather “clippers” already this season. Freakin’ miserable outside conditions, with wind chill factored in. Depressing to monitor the weather at the Colorado property (9,000 feet +) and realize it’s consistently warmer in the mountains.
I’m finding it extremely difficult to experience the “joy” of the season; the frigid weather is not helping. The blast of orchestral and choral music at Luther College, on the other hand, offered a temporary lift.
Happy Trails.
An interesting (and frustrating) flat spring challenge for your door lock.
An easy enough do-it-yourself if you had a small machine shop with grinding and cutting tools, and access to spring steel stock… It looks like simple work – no die work to shape the spring necessary.
I found nothing on the specific type of spring steel used with flat springs in the late 19th century. I would assume that types 1080 or 5160 would do the job fairly well – 5160 is often used in knives, and shows less fatigue…
A local machinist who does piece work would be ideal. Alternatives are a High School (if they still offer “shop” or the community college in Charles City. That would still mean acquiring the spring steel stock for the project.
I did note one source of “historic house parts” flat springs: https://www.historichouseparts.com/antique-mortise-lock-flat-spring-sold-each-.html
Might be worth a try to see if they have your specific size. I don’t know if you have a micrometer or similar for the thickness measurement…
Another source offers DIY options: https://www.emachineshop.com/spring-steel-parts/
It feels like a bit of “overkill” – a source for multiple complex pieces with matching prices.
Everything comes down to cost. Realistically, the part including shipping should cost no more than $20. If one is willing to pay enough, you can get almost anything.
I had no luck in finding what I was really looking for – an online machinist looking to do piece work…
Larry:
Thanks for the note. I did locate a source for flat spring material and ordered two strips. They should be here in a few days. Size is 1/8th inch wide by .028 in thick. Recommended for most locks of my type, but source also 1/4 by .025 if I need a wider strip. I’ll let you know how this project turns out!
Jerry